Announcement

Collapse
No announcement yet.

Muthr Thumpr cams

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Muthr Thumpr cams

    1966 f100 with stock 352. I plan on headers and eventually intake w/carb. Would this cam kit work with everything else stock? Comp cams K33-600-5! Thanks for the advice! On a budget!

  • #2
    The Cam should work. I had a 1966 F-250 4 speed manual and a 352 that was bored out .030. The rest was stock. We had a similar cam grind from Comp Cams - not a thumper tho - (in the 220 range at 050 as I recall) I had it on a Holley Street Dominator single plane intake, 650 CFM Edelbrock carb that we did some tuning to, set of flowtech headers. The thing ran amazing and would pull like no tomorrow.

    Comment

    Working...
    X