Announcement

Collapse
No announcement yet.

1949 chevy pickup

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Braden49
    replied
    Click image for larger version

Name:	8795EAC4-8D31-4B3C-92BA-DD1121C4FD2D.png
Views:	29
Size:	352.4 KB
ID:	729503
    older photo but this is roughly what the truck will look like

    Leave a comment:


  • Braden49
    replied
    Click image for larger version

Name:	BC2A05D0-B8F4-478A-AA9D-75F0A9980543.png
Views:	26
Size:	579.9 KB
ID:	729501
    After. this one was a little more tricky, just got the lower cowl to doors to do next

    Leave a comment:


  • Braden49
    replied
    Click image for larger version

Name:	19D52ED8-0BED-4D8F-BAC8-3E7232AB40CB.png
Views:	25
Size:	602.5 KB
ID:	729499
    before

    Leave a comment:


  • Braden49
    replied
    Click image for larger version

Name:	F23131D0-73BA-4C7D-B0E3-E14474B9B249.png
Views:	23
Size:	812.2 KB
ID:	729497
    little cutting and Welding, got it a lot better

    Leave a comment:


  • Braden49
    replied
    Click image for larger version

Name:	D1AB7DDE-25CE-4D8F-8651-27BD119F0F48.png
Views:	26
Size:	553.5 KB
ID:	729495
    ugly door gaps must be fixed even for a rat rod


    Leave a comment:


  • Braden49
    replied

    new rims and tires, rims are U.S. wheel 17” x9”

    Leave a comment:


  • Braden49
    replied
    Click image for larger version

Name:	C60566B9-17F6-4F27-8519-C145964AFB66.jpeg
Views:	26
Size:	2.78 MB
ID:	729492

    Leave a comment:


  • Braden49
    replied
    Click image for larger version

Name:	74D24569-00C3-4639-B0E4-8CA9EFD2758F.jpeg
Views:	28
Size:	2.84 MB
ID:	729490
    fuel cell, battery, compressors mounted, and frame is painted, will like to get everything powder coated in the future.

    Leave a comment:


  • Braden49
    replied
    Click image for larger version

Name:	B25B6187-05ED-4420-912F-E3414628E5A0.jpeg
Views:	14
Size:	3.12 MB
ID:	729488
    my transmission tunnel, will be running a two piece rear driveshaft to help with the driveline angles with the air ride and so I don’t have to cut the floor more

    Leave a comment:


  • Braden49
    replied
    Click image for larger version

Name:	81FF6C13-0586-45F3-8371-772507683AC4.jpeg
Views:	14
Size:	2.48 MB
ID:	729486

    Leave a comment:


  • Braden49
    replied
    Click image for larger version

Name:	ADFA215F-65D8-405F-AFAA-ACB61E651005.png
Views:	16
Size:	614.2 KB
ID:	729484
    going with a different look on the dash adding the eyebrow integrating into the doors

    Leave a comment:


  • Braden49
    replied
    Click image for larger version

Name:	46FF0274-6805-4A20-BF3D-5C1D78FBB028.jpeg
Views:	16
Size:	2.88 MB
ID:	729482
    Door inner patched ✅

    Leave a comment:


  • Braden49
    replied
    Click image for larger version

Name:	DAEDDF89-8802-4B2F-B30F-27FFABC8661B.png
Views:	16
Size:	641.0 KB
ID:	729480
    Just had to spend the money on sound deadening. Will be going on inside the doors, roof, and floor as well.

    Leave a comment:


  • Braden49
    replied
    Click image for larger version

Name:	44E79F0B-E71B-4C66-A1AF-6BAF4D79C694.png
Views:	15
Size:	581.6 KB
ID:	729478
    this rear panel is off the orange truck I started with in my earlier post, the cab was to far gone to be saved Atleast a part of the old truck gets to live on. New lower patches welded on with minimal distortion. Much happier with it now

    Leave a comment:


  • Braden49
    replied
    Click image for larger version

Name:	02848337-3E36-40DA-B186-825BC2678FA1.png
Views:	16
Size:	648.3 KB
ID:	729476
    Welding in my cab corner patches a few years back I had no idea what I was doing and warped the crap out of the rear panel. Glad to finally addressing this issue. Biggest regret on this truck so far

    Leave a comment:

Working...
X