Follow Us On Follow us on Facebook Watch us on YouTube Watch us on Google+
Register
Results 1 to 8 of 8
  1. #1

    Default front straight axle questions

    i was thinking about building my own front axle setup and was wondering if anybody had any advise on material sizes and what kind of spindles i could use from a junk yard car. im a fabricator for a living so i have access to most tools and materials. thanks in advance pics are very helpful



  2. #2

    Default

    i am not sure what you are asking. are you talking about assembling a existing axle with new springs or literally machining new tubing for the axle boss'? then machining the axle boss' from solid steel and welding them on? if it is the latter, there is a guy that sells blueprints on the bay to make your own axle. i have bought them and they are quality prints. also, they are full size.
    http://www.ebay.com/itm/05-GASSER-ST...nKt6bw&vxp=mtr

  3. #3

    Default

    Probably about the newest vehicle you will find with king pins is going to be 1979 Ford pickup. Unless you are machining the back of the spindle off and welding on provision for a king pin. Then I would suggest something plentiful, like S10

  4. #4
    Join Date
    Jan 2017
    Location
    south of detroit
    Posts
    28

    Default

    Something I have seen done is take an old 4x4 front axle and remove the axleshafts then cut out the center section and weld in a piece of heavy wall tubing .That way you end up with modern disk brakes and ball joints on a straight axle.

  5. #5

    Default

    Does anybody know the size of af I beam used for a model a front end. Is there other front ends like those that may be a little easier to find and modify to look and function like those

  6. #6
    Join Date
    Jan 2012
    Location
    superior montana on 1.25 acres out of town
    Posts
    2,490

    Default

    I know a G10 Chevy van from mid 60s is a beam with a drop already. It is a parallel leaf with spring pads that could be used "model a" style with adapter pads. Small Gm car lug pattern and if you were lucky to have the drums---finned cast iron.

  7. #7
    Join Date
    Mar 2012
    Location
    Zephyrhills, Florida, USA
    Posts
    96

    Default

    Quote Originally Posted by grape ape View Post
    i was thinking about building my own front axle setup and was wondering if anybody had any advise on material sizes and what kind of spindles i could use from a junk yard car. im a fabricator for a living so i have access to most tools and materials. thanks in advance pics are very helpful
    If I were going to do this, I'd begin at Speedway Motors. No need to re-invent the wheel, they have everything you will need and it'll be less expensive and easier than trying to cobble up something from scratch.

  8. #8

    Default

    Oh ok I just thought since this was a rat rod I might be able to fab it up myself rather than some bolt on stuff everybody else has on their car

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •